www.ptasia.biz
Home
-A +A
 





















 

 

WIRE and CABLE MAMARKER

"NATEE HOTMARKER" is the trademark of our products.
With the hot-stamping system of character printing, it has a wide application for printing identification marks or numbers put on wiring tubes, wire jackets and electric components including various molded plastic parts.  

HOT STAMPING SYSTEM
Heated metal printing types print the required characters by heat transfer, when pressing color foil tape inbetween directly onto the workpieces. Printings can be accomplished beautifully and durably at a relatively low cost and by a simple operation. 

WHAT KIND OF PRINTING TYPES ARE USED?
There are two different systems, namely character wheel rotating system and printing type setting system. The character wheel rotating system is suitable for printing wire numbers, manufacturing numbers and etc, by use of a combination of alphabetical letters and numerals. Quick selection and alignment of characters are possible. Character selection is easy, and stable printings are possible, with minimal temperature drops even immediately after character combination changes are made.

The printing type setting system is mainly used for printing small size characters, special style characters, logograms and etc.
By combinating various types, it can be applicable for printing marks of complicated combination of characters. 


THERMAL HEAD PRINTING SYSTEM
Hotmarker SP Series adopt the thermal head printing system.
It is a system different from the above system, but as a result of various testings, it has been proven that it offers the equal durability as that of hot stamping.

 
MANUAL BENCH TYPE HOTMARKER
Put a material on the anvil, turn the printing wheels to set a desired number. Then just press down the marking head. Permannet identifications in various colors can be obtained very easily.

Standard machine of is supplied in a ready-to-use kit for marking sleeve tubes (with flat face characters), or wires and cables (with curved face characters)
                                                                                                                                           
All model NATEE hotmarker provide a wide for sleeves, wires, cables, nylon, plastic, other electronic parts.
                                                                                                          
FOR VARIABLE MARKING
Character Priting Wheel System
The character priting wheel system consisting of alphabetical letters A to Z, numberals 0 to 9 and some symbols permits infinitely variable combination of characters within just w few seconds.
                                                                                                                                

 
For wires, cables and other round-shaped materials, curved face characters are used, For sleeve tubes, connectors, plastic plates and other flat surface materials, flat face characters are used. Specify your requirements according to your bob.
Color Foil Tapes
Foil tapes in colors of black, white, red, and yellow can be supplied as standard. About 10,000 time markings are possitble per roll of tape. Select suitable size and kind of foil tabe to your specific requirement.
                                                                                                                                


 
PNEUMATIC  TYPE HOTMARKER
The marking head of PNEUMATIC TYPE moves vertically by air pressure with a foot pedal switch. The operation with push button switches is also possible at option.

As the marking time, temperature and pressure, It is easy for anyone to always obtain the best marking results after setting the suitable conditions.


Applicaiton to various materials such as plastic plates, leathers, labels connectors and MP legible and permanent identifications.
Tie band
Fiber tags
Thin wires
Suitable work holders for positioning specially shaped materials can be desinged.
Send sample materials for our quotation

 
LARGE MANUAL HOTMARKER
Maximum character height is 10mm. Logos and special characters can also be engraved, Select suitable size of characters according to your materials to be marked.
 
 
Model number, batch number, standard number and etc. can be prepared on a specially wide block type as fixed marking.
Type Holder for setting types is included in standard accessories. When types of character pitch 3.0mm are used, markings up to 15 digits are possible.
Special types and type holders for multiple line marking and circular marking can also be desinged at option.

 

 



Home
    ©Copyright 2002-2018 All rights reserved.
PT Asia, Thailand Co., Ltd.
998 Moo 3, Samrong Nua, Muang, Samutprakarn 10270. Thailand
Tel : +66 (0)2 759-3605-12 Fax: +66 (0)2 759-3569
Email : info@ptasia.biz